technologies & equipment scientific research & grants information resources

 
 

 

POWER SUPPLIES ACTIVITY

microArc

POWER SUPPLY for MICROARC OXIDATION

 

30 kVA SOLID STATE SOLUTION for powering of the technological process of the microarcs oxidation.

  • Compact and Reliable.
  • Providing 256 steps of discharge current with maximum value up to 75A at 50(60)Hz.
  • Works with Industrial mains 3X380V at 50Hz or 3X480V at 60Hz.
  • Soft Current Start Mode ensures high quality defect-free ceramic coating. 
  • Power Supply is equipped by flash-microcontrollers providing:
    • Data acquisitions of the technological process parameters
    • Manual or Programmed  Mode of operation.
  • In the Program Mode the PS is connected to PC via RS232 and works under mARCYCLO (ver. 1.2) software. 

download specification>>>

OZON

POWER SUPPLY for BARRIER DISCHARGE DEVICE

  • PS generates a high voltage pulse with maximum amplitude up to 25kV.
  • Control unit provides 32 levels of output HV.
  • The pulse frequency and duty cycle are regulated.
  • PS delivers up to 1,5 kVA.
  • The PS works under the Manual and  Program Operation Modes.
  • Software “DriveIt ver.1.1” drives PS thru RS232.

X247

POWER SUPPLY for TURBOMOLECULAR PUMP

  • PS is intended for 01AB1500 turbomolecular pump with pumping rate 1500l/s (720l/s).
  • For replacement a standard BP247.
  • Reliable.  Output stage is equipped by IXBT.
  • Microcontroller provides a fast programmed start.

DAS

POWER SUPPLY FOR ION SOURCE

  • up to 100 mA
  • mC Driven
  • Remote control from PC

 

MAGPS-1.5

POWER SUPPLY FOR DC MAGNETRONS

  • Output Power 1500W
  • Output Current up to 2.5A

more info>>>

 

 

 
Copyright © 1998-03 Plasma LAB | e-mail:tsyg@bmstu.ru | tel: +7 (095) 263 6085 |Russian version